Conveying Elements
MEL - Bucket Elevator
MEL - Bucket Elevator
  • Used for vertical conveying all kinds of cereals and pulses.
  • Elevator head is made of galvanized sheet in two pieces and has a removable design.
  • The fittings are designed with bolt.
  • Elevator legs are made of 1,5 mm or 2 mm disjoint pressed galvanized sheet.
  • The legs are removable for bucket fitting.
  • Abrasion-resistant precautions are taken at product inlet and outlet.
  • Knock detectors are also placed in the elevator inlet.
  • Pulleys are designed such that to keep the belts aligned.
  • Optionally, the pulleys shall be aligned with alignment sensor and shall be covered with rubber
  • The elevator head and boot is equipped with access point for easy cleaning and maintenance.
  • Dust explosion vents are placed in critical points on elevator
  • Also the dust in the elevators is aspirated to prevent dust pollution in the mill.
  • The holes under the buckets are helps for aspiration as well.
  • Plastic buckets might be used and belt speed observed, if demanded.